First 7 Days - Curing
- Do not wash the vehicle for the first 7 days to allow the ceramic coating to fully cure.
- Avoid rain, sprinklers and any water contact for the first 24-48 hours where possible.
- Do not apply waxes, sealants or quick detailers during the curing period.
- Park indoors or in shade where possible for the first week.
Washing Your Vehicle
- Wait a minimum of 7 days after collection before the first wash.
- Use a pH-neutral car shampoo - never dish soap or household cleaners.
- Wash every 2 weeks using the two-bucket method (one wash, one rinse).
- Use only soft microfibre wash mitts and drying towels - no brushes or sponges.
- Wash from the roof down, finishing with the lower panels and wheels last.
- Dry thoroughly with a clean microfibre towel to prevent water spots.
Caring for Your PPF
- PPF is self-healing - light swirls and fine scratches recover with warm water or sunlight.
- Do not wax or polish the film. Use only PPF-safe detail spray if desired.
- Avoid parking under trees where sap and bird droppings can sit for long periods.
- Lift edges gently when drying - never pick or pull the film at the borders.
- Remove bird droppings, bugs and tar promptly with a soft, damp microfibre.
Caring for Coated Glass
- Clean glass with a dedicated ceramic-safe glass cleaner and microfibre cloth.
- Avoid ammonia-based glass cleaners on coated side and rear glass.
- Do not use scrapers or abrasive pads on coated glass.
- Use wipers only when necessary and keep the wiper rubber clean.
Caring for Coated Wheels
- Allow wheels to cool fully before cleaning - never wash hot wheels.
- Use a pH-neutral wheel shampoo and a soft barrel brush only.
- Avoid acidic wheel cleaners - they will degrade the ceramic coating.
- Clean wheels before the rest of the vehicle to prevent overspray.
What to Avoid
- Automatic car washes (brush and touchless) - hand wash only.
- Acidic, alkaline or solvent-based cleaners.
- Wax, polish or sealant on the ceramic coating or PPF.
- Drying the vehicle in direct sunlight or with a hot surface.
- Leaving bird droppings, sap or bug splatter to bake on.
Maintenance Schedule
First 7 daysNo washing. Let coating cure fully.
Week 2First hand wash with pH-neutral shampoo.
Every 2 weeksRegular hand wash using the two-bucket method.
Every 6 monthsInspection and top-up coating refresh (optional).
AnnuallyProfessional inspection to validate warranty.
Need Help?
If you have any questions about caring for your protection package, reach out - we're happy to help.
Cured Car Detailing · Cairnlea, VIC · Wed-Sun by appointment
